Fast hydraulic hose and fittings support for OEM, distributor and project inquiries.
Request QuoteProduct Center
Fitting selang hidrolik dan ferrule untuk hose assembly crimp: JIC 37 degree, BSP/NPTF, DIN metric DKO, ORFS/ORS, SAE flange, ferrules, sockets dan two-piece fittings. Konfirmasi hose series, dash size, thread, sealing face, fitting angle, ferrule dan crimp diameter sebelum quotation agar assembly tidak bocor atau pull-off.
Fitting selang hidrolik dan ferrule untuk hose assembly crimp: JIC 37 degree, BSP/NPTF, DIN metric DKO, ORFS/ORS, SAE flange, ferrules, sockets dan two-piece fittings. Konfirmasi hose series, dash size, thread, sealing face, fitting angle, ferrule dan crimp diameter sebelum quotation agar assembly tidak bocor atau pull-off.
Showing all 11 results
Use this checklist before requesting a quotation. Final pressure, temperature and crimp values must be confirmed against the exact hose and fitting data sheet.
| Selection item | What to confirm | Why it matters |
|---|---|---|
| Connection standard | BSP / NPTF / JIC 37 degree / DIN 24 degree / ORFS / SAE flange | Prevents thread and sealing mismatch |
| Sealing method | Thread, metal cone, O-ring face or flange O-ring | Controls leakage at pressure cycles |
| Hose compatibility | Hose ID, reinforcement family and fitting stem series | Avoids pull-off and incorrect insertion |
| Ferrule and crimp | Ferrule series, insertion depth and verified crimp diameter | Creates a repeatable hose assembly |
| Environment | Carbon steel coating, stainless option and corrosion exposure | Improves service life in marine or wet duty |
Indonesia service: send the hose marking, inside diameter, working pressure, machine model, fitting ends, length and quantity to our Surabaya team.
Request technical selection support | Browse hydraulic hose products | View industry solutions
No. Confirm thread form, pitch, sealing face, hose ID, reinforcement family, fitting stem and ferrule series.
The approved combination controls compression and retention. An incorrect ferrule can cause leakage, cover damage or fitting pull-off.
Send clear thread and seat photos, caliper measurements, hose marking, pressure, orientation, overall assembly length and quantity.
AI Search FAQ / Indonesia Local Service
Correct fitting and ferrule selection is critical for leak-free hose assemblies, repeatable crimping and safe equipment maintenance.
Choose by machine port standard, seal face and thread measurement. BSP is common in many machines, JIC uses 37 degree flare sealing, DIN Metric is common on European equipment and ORFS is often selected for better leak resistance.
No. Ferrule series must match hose type, hose cover, reinforcement, fitting stem tail and crimping specification. Braided hose and spiral hose often require different ferrules.
Send thread photos, male or female type, thread diameter, pitch, sealing face, hose size and machine model. This reduces wrong fitting selection and repeat downtime.
Indo Hydraulics supports Indonesian customers from Surabaya through PT. AMANAH TECHNINDO JAYA. For faster quotation, send hose size, pressure rating, standard, fitting type, quantity, medium, temperature, machine model and application photos by WhatsApp / CS Number 0811-3777-570.
Correct fitting selection depends on thread standard, sealing method, hose type and crimping ferrule series. Common standards include BSP, NPTF, JIC, DIN Metric, ORFS and SAE flange fittings.
Correct fitting standard and ferrule series are essential for leak-free hydraulic hose assembly and repeatable crimping quality.
| Product / Standard | Structure | Pressure / Duty | Temperature | Typical application |
|---|---|---|---|---|
| BSP / NPTF | Thread sealing or cone sealing depending type | General equipment, older machines and utility lines | Check thread pitch and seal face before crimping | |
| JIC 37 degree | Metal-to-metal flare sealing | Construction, agriculture and mobile hydraulic repair | Do not mix with metric cone fittings | |
| DIN Metric / ORFS / SAE Flange | Metric cone, O-ring face seal or flange sealing | OEM machines, high pressure and vibration lines | Match ferrule, stem tail and hose family |
Inquiry tip: send hose size, working pressure, media, temperature, fitting standard, quantity and application photos for faster WhatsApp quotation.
Please share your requirements, quantity, and specifications. We will reply promptly.
