Indonesia WhatsApp
+6282152168698
Open WhatsAppProduct Center
SAE 100 R3 / R6
SAE 100 R3 / R6 Wrapped Cover Braided Hydraulic Hose products from the customer catalogue.
Live categories
Distributor inquiry
Specification review
SAE 100 R3 / R6 Wrapped Cover Braided Hydraulic Hose products from the customer catalogue.
Technical Selection Guide
SAE 100 R3 / R6 applications, structure and selection table
SAE 100 R3 / R6 should be selected by application, hose construction, pressure, temperature, medium and fitting compatibility. The table below gives buyers a practical checklist before quotation.
| Selection item | Technical guidance | Buyer check |
|---|---|---|
| Application | Outdoor machinery, mining, plantation equipment, repair shops and severe-duty replacement lines. | Confirm machine, medium, routing and duty cycle. |
| Structure | Wrapped rubber cover, synthetic rubber tube and steel wire braid reinforcement. | Tube, reinforcement and cover must match the working medium. |
| Standard / family | SAE 100 R1 / R2 / R3 / R6 / R16 / R17 / R19, EN853, EN857 and related wrapped cover families. | Do not quote only by outside diameter or appearance. |
| Pressure | Ranges from low return lines to high-pressure braided hose; final pressure depends on standard and I.D. | Final working pressure must be checked by hose I.D. and datasheet. |
| Temperature | Common hydraulic oil service is usually around -40C to +100C; special media or heat requires confirmation. | Confirm oil, water, steam, chemical or ambient heat conditions. |
| Fitting compatibility | Match ferrule, stem and crimp diameter to wrapped cover hose construction. | Match fitting stem, ferrule, crimp data and end standard. |
Suitable industries
Mining, construction, agriculture, palm oil equipment, repair workshops and distributors.
Selection FAQ
How should I select wrapped cover braided hydraulic hose?
Start with working pressure, hose I.D., medium, temperature, bend radius, routing space and fitting end standard. Then confirm the exact catalogue line and crimp data.
Can I use the same fittings for every hose in this family?
No. Fitting stem, ferrule and crimp diameter must match hose construction, cover type and pressure class.
What information should I send for a faster quote?
Send hose standard or product name, I.D. or dash size, working pressure, temperature, medium, fitting standard, quantity and application photos when available.
Which industries commonly use this product?
Mining, construction, agriculture, palm oil equipment, repair workshops and distributors.
Category Parameters
SAE 100 R3 / R6 technical parameter comparison
Use these parameters to compare hose families before opening individual product pages. Final pressure, burst and temperature values should be confirmed by size, catalogue chart and working medium.
| Applications | Outdoor machinery, mining, plantation equipment, repair shops and severe-duty replacement lines. |
|---|---|
| Construction | Wrapped rubber cover, synthetic rubber tube and steel wire braid reinforcement. |
| Reinforcement | One or two wire braid reinforcement, plus specialty textile or compact lines where applicable. |
| Cover | Wrapped cover for abrasion resistance, handling grip and outdoor service conditions. |
| Standards / product family | SAE 100 R1 / R2 / R3 / R6 / R16 / R17 / R19, EN853, EN857 and related wrapped cover families. |
| Working pressure range | Ranges from low return lines to high-pressure braided hose; final pressure depends on standard and I.D. |
| Burst pressure | Confirm minimum burst pressure from the product chart; do not mix low pressure return hose with pressure lines. |
| Temperature range | Common hydraulic oil service is usually around -40C to +100C; special media or heat requires confirmation. |
| Suitable industries | Mining, construction, agriculture, palm oil equipment, repair workshops and distributors. |
| Fitting compatibility | Match ferrule, stem and crimp diameter to wrapped cover hose construction. |
Showing the single result
