Indonesia WhatsApp
+6282152168698
Open WhatsAppProduct Center
Sandblast Hose
Sandblast Hose products from the customer catalogue.
Live categories
Distributor inquiry
Specification review
Sandblast Hose products from the customer catalogue.
Technical Selection Guide
Sandblast Hose applications, structure and selection table
Sandblast Hose should be selected by application, hose construction, pressure, temperature, medium and fitting compatibility. The table below gives buyers a practical checklist before quotation.
| Selection item | Technical guidance | Buyer check |
|---|---|---|
| Application | Sandblast, cement, plaster, concrete pump and abrasive material transfer. | Confirm machine, medium, routing and duty cycle. |
| Structure | Abrasion-resistant tube with textile or wire reinforcement and rugged cover. | Tube, reinforcement and cover must match the working medium. |
| Standard / family | Abrasive or concrete transfer hose family selected by medium, pressure and wear requirement. | Do not quote only by outside diameter or appearance. |
| Pressure | Working pressure differs greatly between sandblast, cement discharge and concrete pumping applications. | Final working pressure must be checked by hose I.D. and datasheet. |
| Temperature | Temperature depends on medium and environment; abrasion normally drives the selection. | Confirm oil, water, steam, chemical or ambient heat conditions. |
| Fitting compatibility | Use material-handling couplings, clamps or flanges rated for pressure and abrasion duty. | Match fitting stem, ferrule, crimp data and end standard. |
Suitable industries
Construction, mining, cement plants, blasting contractors and jobsite maintenance.
Selection FAQ
How should I select abrasive material hose?
Start with working pressure, hose I.D., medium, temperature, bend radius, routing space and fitting end standard. Then confirm the exact catalogue line and crimp data.
Can I use the same fittings for every hose in this family?
No. Fitting stem, ferrule and crimp diameter must match hose construction, cover type and pressure class.
What information should I send for a faster quote?
Send hose standard or product name, I.D. or dash size, working pressure, temperature, medium, fitting standard, quantity and application photos when available.
Which industries commonly use this product?
Construction, mining, cement plants, blasting contractors and jobsite maintenance.
Category Parameters
Sandblast Hose technical parameter comparison
Use these parameters to compare hose families before opening individual product pages. Final pressure, burst and temperature values should be confirmed by size, catalogue chart and working medium.
| Applications | Sandblast, cement, plaster, concrete pump and abrasive material transfer. |
|---|---|
| Construction | Abrasion-resistant tube with textile or wire reinforcement and rugged cover. |
| Reinforcement | Textile plies, wire reinforcement or heavy-duty construction depending on material and pressure. |
| Cover | Abrasion and weather-resistant cover for construction and material handling sites. |
| Standards / product family | Abrasive or concrete transfer hose family selected by medium, pressure and wear requirement. |
| Working pressure range | Working pressure differs greatly between sandblast, cement discharge and concrete pumping applications. |
| Burst pressure | Check burst pressure, wear allowance and coupling retention before selection. |
| Temperature range | Temperature depends on medium and environment; abrasion normally drives the selection. |
| Suitable industries | Construction, mining, cement plants, blasting contractors and jobsite maintenance. |
| Fitting compatibility | Use material-handling couplings, clamps or flanges rated for pressure and abrasion duty. |
Showing the single result
