描述
ORFS / ORS Hose Fittings
ORFS (O-ring face seal) joints seal at a flat face with a correctly specified O-ring. Our fitting catalogue lists this family under ORS for two-piece braided hose assemblies. Confirm the mating face, thread, hose size and O-ring material instead of selecting from thread size alone.
目录系列
| Series | End form | What to verify |
|---|---|---|
| 14211 | Male rigid | Flat face, thread and hose dash size |
| 24211 | Female swivel | Mating face, O-ring and swivel clearance |
| 24241 / 24291 | Female 45° / 90° elbow | Orientation and routing clearance |
The catalog provides part-specific threads, cut-off factors and hose sizes. For example, 14211-04-04Z is listed with 9/16-18 thread and DN 6 (-04) hose. Confirm the exact part row, hose series and compatible ferrule before crimping; these fitting-table dimensions are not a pressure rating.
Failure-prevention check
Oil at the face seal can indicate a damaged or wrong O-ring, scratched mating face, misalignment or an incompatible end. Isolate pressure before inspection. Identify both sides of the joint and the operating fluid and temperature before selecting a replacement seal or assembly.
Compare JIC 37° fittings and braided hose fittings. See the hose assembly shop solution for receiving, identification and crimp-control steps in Indonesia.
评价
目前还没有评价