产品中心

SAE 100 R2

SAE 100 R2 布纹外覆编织液压胶管目录产品。

实时分类经销商询价规格审查

SAE 100 R2 布纹外覆编织液压胶管目录产品。

Technical Selection Guide

SAE 100 R2 applications, structure and selection table

SAE 100 R2 should be selected by application, hose construction, pressure, temperature, medium and fitting compatibility. The table below gives buyers a practical checklist before quotation.

Selection item	Technical guidance	Buyer check
应用	Outdoor machinery, mining, plantation equipment, repair shops and severe-duty replacement lines.	Confirm machine, medium, routing and duty cycle.
Structure	Wrapped rubber cover, synthetic rubber tube and steel wire braid reinforcement.	Tube, reinforcement and cover must match the working medium.
Standard / family	SAE 100 R1 / R2 / R3 / R6 / R16 / R17 / R19, EN853, EN857 and related wrapped cover families.	Do not quote only by outside diameter or appearance.
Pressure	Ranges from low return lines to high-pressure braided hose; final pressure depends on standard and I.D.	Final working pressure must be checked by hose I.D. and datasheet.
Temperature	Common hydraulic oil service is usually around -40C to +100C; special media or heat requires confirmation.	Confirm oil, water, steam, chemical or ambient heat conditions.
Fitting compatibility	Match ferrule, stem and crimp diameter to wrapped cover hose construction.	Match fitting stem, ferrule, crimp data and end standard.

Suitable industries

Mining, construction, agriculture, palm oil equipment, repair workshops and distributors.

Selection FAQ

How should I select wrapped cover braided hydraulic hose?

Start with working pressure, hose I.D., medium, temperature, bend radius, routing space and fitting end standard. Then confirm the exact catalogue line and crimp data.

Can I use the same fittings for every hose in this family?

No. Fitting stem, ferrule and crimp diameter must match hose construction, cover type and pressure class.

What information should I send for a faster quote?

Send hose standard or product name, I.D. or dash size, working pressure, temperature, medium, fitting standard, quantity and application photos when available.

Which industries commonly use this product?

Mining, construction, agriculture, palm oil equipment, repair workshops and distributors.

Category Parameters

SAE 100 R2 technical parameter comparison

Use these parameters to compare hose families before opening individual product pages. Final pressure, burst and temperature values should be confirmed by size, catalogue chart and working medium.

Applications	Outdoor machinery, mining, plantation equipment, repair shops and severe-duty replacement lines.
工程建设	Wrapped rubber cover, synthetic rubber tube and steel wire braid reinforcement.
Reinforcement	One or two wire braid reinforcement, plus specialty textile or compact lines where applicable.
Cover	Wrapped cover for abrasion resistance, handling grip and outdoor service conditions.
Standards / product family	SAE 100 R1 / R2 / R3 / R6 / R16 / R17 / R19, EN853, EN857 and related wrapped cover families.
Working pressure range	Ranges from low return lines to high-pressure braided hose; final pressure depends on standard and I.D.
Burst pressure	Confirm minimum burst pressure from the product chart; do not mix low pressure return hose with pressure lines.
Temperature range	Common hydraulic oil service is usually around -40C to +100C; special media or heat requires confirmation.
Suitable industries	Mining, construction, agriculture, palm oil equipment, repair workshops and distributors.
Fitting compatibility	Match ferrule, stem and crimp diameter to wrapped cover hose construction.

显示单一结果

SAE 100 R2 布纹外覆编织液压胶管
询价获取报价