Deskripsi
Oil Suction and Discharge Hose technical overview
Oil suction and discharge hose for diesel, lubricating oil and fuel transfer in workshops, marine service, palm oil mills and mobile refuelling equipment.
Catalog-based construction and application
| Tube | NBR oil resistant rubber with helix wire support. |
|---|---|
| Reinforcement | Textile yarn reinforcement plus helix wire for suction/discharge. |
| Cover | Oil, weather and abrasion resistant synthetic rubber cover. |
| Working pressure | Catalog industrial range: 20 bar up to 2 inch and 10 bar for 3 inch to 4 inch. |
| Temperature | -30 C to +80 C typical oil transfer service. |
| Standard / reference | Indo Hydraulics oil S&D hose catalog family. |
| Aplikasi | Fuel transfer, lubricating oil handling, oil suction/discharge and service truck lines. |
| Fitting compatibility | Camlock, BSP/NPT, flange or custom crimped assemblies for oil transfer systems. |
Size and pressure reference
The table below follows the dimensional pattern shown in the Indo Hydraulics hose catalog. Final hose assembly selection should confirm fluid, impulse load, route radius and crimp fitting series.
| I.D. inch | I.D. mm | O.D. mm | W.P. MPa / psi | Bend radius mm | Weight kg/m |
|---|---|---|---|---|---|
| 1/2" | 13 | 22 | 20 / 300 | 65 | 0.31 |
| 5/8" | 16 | 25 | 20 / 300 | 80 | 0.37 |
| 3/4" | 19 | 29 | 20 / 300 | 95 | 0.50 |
| 1" | 25 | 36 | 20 / 300 | 125 | 0.67 |
| 1-1/4" | 32 | 44 | 20 / 300 | 300 | 0.95 |
| 1-1/2" | 38 | 51 | 20 / 300 | 360 | 1.18 |
| 2" | 51 | 66 | 20 / 300 | 450 | 1.75 |
| 3" | 76 | 92 | 10 / 150 | 750 | 2.65 |
| 4" | 102 | 118 | 10 / 150 | 1000 | 3.81 |
Selection notes for buyers
- Use suction/discharge hose selection by media, vacuum demand, cover abrasion and routing conditions.
- Confirm liner compatibility for oil, chemical, cement, water, air or hot media before order.
- For bulk users, keep common lengths and end connections ready for maintenance shutdowns.
FAQ
Can this hose be supplied as a crimped hose assembly?
Yes. Indo Hydraulics can match hose, ferrule and fitting type for replacement or project supply, including BSP, JIC, ORFS, NPT and DIN metric connection patterns.
Which size should be stocked for maintenance?
Fast-moving maintenance sizes usually depend on the equipment population. For mobile hydraulic lines, 1/4 inch to 1 inch sizes are common; for industrial transfer hose, 1/2 inch to 4 inch sizes are often requested.
How should pressure be confirmed?
Choose by working pressure, burst margin, bend radius, temperature and fluid compatibility. Do not select by hose size alone.
