WhatsApp Indonesia
+6282152168698
Buka WhatsAppPusat Produk
EN853 1SN/1ST
EN853 1SN/1ST Smooth Cover Hydraulic Hose products from the customer catalogue.
Kategori aktif
Permintaan distributor
Tinjauan spesifikasi
EN853 1SN/1ST Smooth Cover Hydraulic Hose products from the customer catalogue.
Technical Selection Guide
EN853 1SN/1ST applications, structure and selection table
EN853 1SN/1ST should be selected by application, hose construction, pressure, temperature, medium and fitting compatibility. The table below gives buyers a practical checklist before quotation.
| Selection item | Technical guidance | Buyer check |
|---|---|---|
| Aplikasi | Compact hydraulic routing, OEM equipment lines, factory machinery and clean catalog supply. | Confirm machine, medium, routing and duty cycle. |
| Structure | Smooth rubber cover, oil-resistant tube and steel wire braid reinforcement. | Tube, reinforcement and cover must match the working medium. |
| Standard / family | SAE 100 R1 / R2 / R16 / R17, EN853 and EN857 families depending on SKU. | Do not quote only by outside diameter or appearance. |
| Pressure | Typical selection range spans medium to high pressure; confirm exact bar or psi by I.D. and standard. | Final working pressure must be checked by hose I.D. and datasheet. |
| Temperature | Usually around -40C to +100C for hydraulic oil service unless a special compound is specified. | Confirm oil, water, steam, chemical or ambient heat conditions. |
| Fitting compatibility | Use matched crimp ferrules and hose fittings for smooth cover braided hose assemblies. | Match fitting stem, ferrule, crimp data and end standard. |
Suitable industries
OEM equipment, construction, agriculture, factory MRO, distributors and hose assembly counters.
Selection FAQ
How should I select smooth cover braided hydraulic hose?
Start with working pressure, hose I.D., medium, temperature, bend radius, routing space and fitting end standard. Then confirm the exact catalogue line and crimp data.
Can I use the same fittings for every hose in this family?
No. Fitting stem, ferrule and crimp diameter must match hose construction, cover type and pressure class.
What information should I send for a faster quote?
Send hose standard or product name, I.D. or dash size, working pressure, temperature, medium, fitting standard, quantity and application photos when available.
Which industries commonly use this product?
OEM equipment, construction, agriculture, factory MRO, distributors and hose assembly counters.
Category Parameters
EN853 1SN/1ST technical parameter comparison
Use these parameters to compare hose families before opening individual product pages. Final pressure, burst and temperature values should be confirmed by size, catalogue chart and working medium.
| Applications | Compact hydraulic routing, OEM equipment lines, factory machinery and clean catalog supply. |
|---|---|
| Konstruksi | Smooth rubber cover, oil-resistant tube and steel wire braid reinforcement. |
| Reinforcement | Single or double high tensile steel wire braid according to SAE / EN product family. |
| Cover | Smooth cover for clean appearance, compact routing and easier wiping in maintenance areas. |
| Standards / product family | SAE 100 R1 / R2 / R16 / R17, EN853 and EN857 families depending on SKU. |
| Working pressure range | Typical selection range spans medium to high pressure; confirm exact bar or psi by I.D. and standard. |
| Burst pressure | Burst pressure follows the selected SAE / EN ratio; verify by size before assembly or quote. |
| Temperature range | Usually around -40C to +100C for hydraulic oil service unless a special compound is specified. |
| Suitable industries | OEM equipment, construction, agriculture, factory MRO, distributors and hose assembly counters. |
| Fitting compatibility | Use matched crimp ferrules and hose fittings for smooth cover braided hose assemblies. |
Tampilkan satu hasil
