WhatsApp Indonesia
+6282152168698
Buka WhatsAppPusat Produk
Selang Hidrolik EN853 1SN / 2SN 135C
Produk katalog Selang Hidrolik EN853 1SN / 2SN 135C.
Kategori aktif
Permintaan distributor
Tinjauan spesifikasi
Produk katalog Selang Hidrolik EN853 1SN / 2SN 135C.
Technical Selection Guide
Selang Hidrolik EN853 1SN / 2SN 135C applications, structure and selection table
Selang Hidrolik EN853 1SN / 2SN 135C should be selected by application, hose construction, pressure, temperature, medium and fitting compatibility. The table below gives buyers a practical checklist before quotation.
| Selection item | Technical guidance | Buyer check |
|---|---|---|
| Aplikasi | Mobile equipment, hydraulic power units, factory machinery, construction equipment and distributor replacement stock. | Confirm machine, medium, routing and duty cycle. |
| Structure | Oil-resistant synthetic rubber tube with steel wire reinforcement and protective rubber cover. | Tube, reinforcement and cover must match the working medium. |
| Standard / family | SAE 100, EN853, EN857 or ISO hydraulic hose family depending on product line. | Do not quote only by outside diameter or appearance. |
| Pressure | Common catalogue range is selected by hose I.D. and standard; many braided lines fall in the medium to high pressure range. | Final working pressure must be checked by hose I.D. and datasheet. |
| Temperature | Typical hydraulic oil service is around -40C to +100C, with higher temperature variants confirmed by product line. | Confirm oil, water, steam, chemical or ambient heat conditions. |
| Fitting compatibility | Compatible with crimp fittings, ferrules and hose ends selected by hose I.D., pressure class and fitting standard. | Match fitting stem, ferrule, crimp data and end standard. |
Suitable industries
Construction, mining, agriculture, manufacturing, marine service and hydraulic hose assembly shops.
Selection FAQ
How should I select hydraulic hose?
Start with working pressure, hose I.D., medium, temperature, bend radius, routing space and fitting end standard. Then confirm the exact catalogue line and crimp data.
Can I use the same fittings for every hose in this family?
No. Fitting stem, ferrule and crimp diameter must match hose construction, cover type and pressure class.
What information should I send for a faster quote?
Send hose standard or product name, I.D. or dash size, working pressure, temperature, medium, fitting standard, quantity and application photos when available.
Which industries commonly use this product?
Construction, mining, agriculture, manufacturing, marine service and hydraulic hose assembly shops.
Category Parameters
Selang Hidrolik EN853 1SN / 2SN 135C technical parameter comparison
Use these parameters to compare hose families before opening individual product pages. Final pressure, burst and temperature values should be confirmed by size, catalogue chart and working medium.
| Applications | Mobile equipment, hydraulic power units, factory machinery, construction equipment and distributor replacement stock. |
|---|---|
| Konstruksi | Oil-resistant synthetic rubber tube with steel wire reinforcement and protective rubber cover. |
| Reinforcement | One or two high tensile steel wire braids depending on pressure class and hose standard. |
| Cover | Smooth or wrapped abrasion-resistant synthetic rubber cover selected by routing and environment. |
| Standards / product family | SAE 100, EN853, EN857 or ISO hydraulic hose family depending on product line. |
| Working pressure range | Common catalogue range is selected by hose I.D. and standard; many braided lines fall in the medium to high pressure range. |
| Burst pressure | Normally specified by standard as a multiple of working pressure; confirm final burst value by size and datasheet. |
| Temperature range | Typical hydraulic oil service is around -40C to +100C, with higher temperature variants confirmed by product line. |
| Suitable industries | Construction, mining, agriculture, manufacturing, marine service and hydraulic hose assembly shops. |
| Fitting compatibility | Compatible with crimp fittings, ferrules and hose ends selected by hose I.D., pressure class and fitting standard. |
Tampilkan satu hasil
