Deskripsi
EN854 1TE / 2TE Wrapped Cover Braided Hydraulic Hose technical overview
EN854 1TE / 2TE wrapped cover hose for low pressure return, pilot and lubrication circuits where flexibility and oil resistance are required.
Catalog-based construction and application
| Tube | Oil resistant synthetic rubber tube. |
|---|---|
| Reinforcement | Textile braid reinforcement for low pressure hydraulic return service. |
| Cover | Wrapped oil and weather resistant rubber cover. |
| Working pressure | Low pressure hydraulic return and transfer service; confirm by size and equipment circuit. |
| Temperature | -40 C to +100 C typical oil service. |
| Standard / reference | EN 854 1TE / 2TE reference. |
| Aplikasi | Return lines, lubrication oil, pilot lines and low pressure hydraulic transfer. |
| Fitting compatibility | Low pressure crimp fittings, hose tails and threaded adapters matched to line duty. |
Size and pressure reference
The table below follows the dimensional pattern shown in the Indo Hydraulics hose catalog. Final hose assembly selection should confirm fluid, impulse load, route radius and crimp fitting series.
| I.D. inch | I.D. mm | O.D. mm | W.P. MPa / psi | Bend radius mm | Weight kg/m |
|---|---|---|---|---|---|
| 3/16" | 5 | 11.7 | 25 / 3630 | 100 | 0.22 |
| 1/4" | 6.3 | 13.3 | 22.5 / 3260 | 100 | 0.28 |
| 5/16" | 8 | 15.0 | 21 / 3045 | 115 | 0.34 |
| 3/8" | 10 | 17.0 | 18 / 2610 | 130 | 0.42 |
| 1/2" | 12.5 | 21.0 | 16 / 2320 | 180 | 0.55 |
| 5/8" | 16 | 24.7 | 13 / 1885 | 205 | 0.70 |
| 3/4" | 19 | 29.0 | 10.5 / 1520 | 240 | 0.86 |
| 1" | 25 | 37.0 | 8.8 / 1275 | 300 | 1.20 |
Selection notes for buyers
- Use for mobile machinery, palm oil equipment, compact routing and maintenance replacement.
- Confirm bend radius around cylinders, pumps, valve blocks and moving arms before assembly.
- Match ferrule and insert series to hose construction to reduce leakage and pull-off risk.
FAQ
Can this hose be supplied as a crimped hose assembly?
Yes. Indo Hydraulics can match hose, ferrule and fitting type for replacement or project supply, including BSP, JIC, ORFS, NPT and DIN metric connection patterns.
Which size should be stocked for maintenance?
Fast-moving maintenance sizes usually depend on the equipment population. For mobile hydraulic lines, 1/4 inch to 1 inch sizes are common; for industrial transfer hose, 1/2 inch to 4 inch sizes are often requested.
How should pressure be confirmed?
Choose by working pressure, burst margin, bend radius, temperature and fluid compatibility. Do not select by hose size alone.
