Deskripsi
Concrete Pump Hose 85 Bar technical overview
85 bar concrete pump hose for severe construction and shotcrete delivery where working pressure, abrasion and coupling safety must be confirmed before use.
Catalog-based construction and application
| Tube | High abrasion NR/SBR rubber liner for concrete slurry. |
|---|---|
| Reinforcement | Heavy duty textile and steel reinforcement selected for 85 bar concrete delivery. |
| Cover | Rugged wrapped cover for abrasion, weather and site handling. |
| Working pressure | 85 bar concrete delivery reference from Indo Hydraulics catalog. |
| Temperature | -30 C to +80 C typical concrete transfer service. |
| Standard / reference | Indo Hydraulics concrete delivery hose catalog family. |
| Aplikasi | Concrete pump boom lines, end hoses, shotcrete and tunnel/construction pumping. |
| Fitting compatibility | Concrete pump couplings and safety clamps matched to hose O.D. and pressure class. |
Size and pressure reference
The table below follows the dimensional pattern shown in the Indo Hydraulics hose catalog. Final hose assembly selection should confirm fluid, impulse load, route radius and crimp fitting series.
| I.D. inch | I.D. mm | O.D. mm | W.P. MPa / psi | Bend radius mm | Weight kg/m |
|---|---|---|---|---|---|
| 1/2" | 13 | 22 | 20 / 300 | 65 | 0.31 |
| 5/8" | 16 | 25 | 20 / 300 | 80 | 0.37 |
| 3/4" | 19 | 29 | 20 / 300 | 95 | 0.50 |
| 1" | 25 | 36 | 20 / 300 | 125 | 0.67 |
| 1-1/4" | 32 | 44 | 20 / 300 | 300 | 0.95 |
| 1-1/2" | 38 | 51 | 20 / 300 | 360 | 1.18 |
| 2" | 51 | 66 | 20 / 300 | 450 | 1.75 |
| 3" | 76 | 92 | 10 / 150 | 750 | 2.65 |
| 4" | 102 | 118 | 10 / 150 | 1000 | 3.81 |
Selection notes for buyers
- Use suction/discharge hose selection by media, vacuum demand, cover abrasion and routing conditions.
- Confirm liner compatibility for oil, chemical, cement, water, air or hot media before order.
- For bulk users, keep common lengths and end connections ready for maintenance shutdowns.
FAQ
Can this hose be supplied as a crimped hose assembly?
Yes. Indo Hydraulics can match hose, ferrule and fitting type for replacement or project supply, including BSP, JIC, ORFS, NPT and DIN metric connection patterns.
Which size should be stocked for maintenance?
Fast-moving maintenance sizes usually depend on the equipment population. For mobile hydraulic lines, 1/4 inch to 1 inch sizes are common; for industrial transfer hose, 1/2 inch to 4 inch sizes are often requested.
How should pressure be confirmed?
Choose by working pressure, burst margin, bend radius, temperature and fluid compatibility. Do not select by hose size alone.
